Language：
- info@baotbio.com
- +86 137-2605-7818
Trial Kits
Mini Kit, Basic Kit, Master Kit
Introduction
Trial Kits are designed for convenience, helping technicians quickly explore the features of BAOT porcelain powders. Available in three options—Mini, Basic, and Master—each kit offers an increasing range of products and shades to suit different levels of expertise and needs.
Specification
Category | Shades |
Mini Kit | Opaque: A2 (2g/pc) Dentine: A2 (5g/pc) Enamel: E-1B (5g/pc) Transparent: ▲T-1 (5g/pc) Modeling Liquid: CFS (15ml/pc) |
Basic Kit | JC Bond: BOND (2g/pc) Opaque: A2/A3 (2g/pc) Dentine: A2/A3 (5g/pc) Enamel: E-1B (5g/pc) Transparent: ▲T-1 (5g/pc) Glaze: G-1 (3g/pc) Modeling Liquid: CFS (15ml) Glaze Liquid: GY (15ml) |
Master Kit | Opaque: A2/A3/B2/B1M1 BL1 (5g/pc) JC Bond: BOND (7g/pc) Stain: S-1A/B/C/D/A 011/B 022/C 032 (3g/pc) Opacious Dentine: A2/A3/B2 (15g/pc) Dentine: A2/A3/B2/B1M1 BL1 (15g/pc) Enamel: E-1A/B/C (15g/pc) Transparent: T-1/▲T-1 (15g/pc) Gingiva: GIN-1A/B/B 073 (15g/pc) Glaze: G-1 (15g/pc) Cervical: C-1A/B (15g/pc) Margin: M-1A (15g/pc) T Blue 1: T-1 061 (15g/pc) Opal 1: T-1 062 (15g/pc) Natural: T-1 063 (15g/pc) Opal 3: T-1 064 (15g/pc) Creamy: T-1 065 (15g/pc) T Blue 2: T-1 068 (15g/pc) Aureola: T-1 071 (15g/pc) Sun Bright: T-1 075 (15g/pc) Occlusal: C-1C 003 (15g/pc) Modeling Liquid: CFS (50ml/pc) Glaze & Stain Liquid: GY (50ml/pc) Opaque Liquid: OF (50ml/pc) Brush-No.7 |
Firing Parameters
Bond | Opaque | Margin | Body* | Add On | Glaze & Stain | |
Initial Temp.(°C) | 550 | 550 | 550 | 550 | 550 | 550 |
Drying Temp.(min) | 2 | 3 | 3 | 3 | 2 | 2 |
Heating Time(min) | 2 | 3 | 3 | 3 | 2 | 2 |
Heating Rate (°C/min) | 60 | 60 | 55 | 55 | 55 | 55 |
Firing Temp.(°C) | 960 | 940 | 930 | 920 | 910 | 890 |
Holding Time(min) | 1 | 1 | 1 | 1 | 1 | 1 |
Cooling Time(min) | 4 | 4 | 4 | 4 | 4 | 4 |
Cooling Temp.(°C) | 550 | 550 | 550 | 550 | 550 | 550 |
Vacuum Start(°C) | 550 | 550 | 550 | 550 | 550 | – |
Vacuum End(°C) | 960 | 940 | 930 | 920 | 910 | – |
Note：
(1). Body* including Cervical, Opacious Dentine, Dentine, Enamel, Transparent, Effect, Gingiva.
(2). Our recommendation for firing temperature is based on numerous test. This firing parameters may be adjusted according to the peculiarities of different furnaces. It is essential to test firing before production.
(3). Please refer to “Instruction for Use” for details.
Case
